5-376-000102
REV. 1 - 07/10
© 2010 Jerr-Dan Corporation. All Rights Reserved.
FOREWORD
This manual is intended to serve as a guide to the owner and operator in the
safe operation and optimum performance of your Jerr-Dan equipment.
Establishment of good operating habits and familiarity with your equipment
and its capabilities combined with good judgement are essential.
Before attempting to operate the unit carefully read all sections of this manual.
This manual should be kept with your equipment at all times and referred to
whenever in doubt of proper operation.
Information contained in this manual reflects how your vehicle was built at
the factory. Modifications or additions by the distributor or owner are not
reflected in this manual.
This manual does not include operation and maintenance information for the
commercial chassis (International, Ford, GM, etc.). This information is pro-
vided by the chassis manufacturer.
When inquiring about operation, maintenance or warranty, please refer to
your equipment’s Sales Order Number, Serial Number and Model Number.
This information can be found on the aluminum tag riveted inside the driver’s
side toolbox on the back wall in the upper right corner.
001
To Next Page
Loading...
Need help?
General
