Jetson Echo X User Manual

10
• UNSCREW THE NUTS FROM THE BOLTS.
• THREAD THE THROTTLE CORD THROUGH THE HOLE IN THE STEM UNTIL THE WHITE CONNECTER EMERGES THROUGH
THE BOTTOM OF THE STEM.
• POSITION THE HANDLEBAR ON TOP OF THE STEM SO THAT THE THROTTLE IS ON THE RIGHT SIDE OF THE STEM WITH
THE HOLE.
• PLACE THE METAL GUARD OVER THE CENTER OF THE HANDLEBAR SO THAT THE HOLES IN THE GUARD ARE ALIGNED WITH
THE HOLES IN THE TOP OF THE STEM.
• THREAD THE BOLTS THROUGH THE HOLES AND TWIST THE NUTS ONTO THE ENDS OF THE BOLTS.
• USING THE ALLEN KEY AND WRENCH, TIGHTEN THE NUTS ONTO THE BOLTS UNTIL THE HANDLEBAR IS SECURE.
METAL GUARD
BOLTS
NUTS
1.1 Assembling the Handlebar
1. Getting Started

Jetson Echo X Specifications

General

Brand	Jetson
Model	Echo X
Category	Scooter
Language	English