Please Note: Images may not reflect exact appearance of actual product.
2. Make Moves
2.3 Riding the Quest
2.1 Using the Thumb Throttle/
Handbrake
2.2 Adjusting the Handbrake
Handbrake
Thumb Throttle
• Place one foot in front.
• Place the other foot in back, at a 70-90° angle.
• Turn the handlebar to the left or right to make turns.
Thumb Throttle:
The Quest is motion activated. Push forward with one foot (about
5-8 kicks consecutively) before using the Thumb Throttle. Also,
please try to take it easy on the throttle until you get used to it.
Note: Cruise Control will activate when you hold the Thumb Throttle
for 8-10 seconds.
Handbrake:
Squeeze the Handbrake slowly to avoid stopping abruptly or losing
control.
BRAKE ADJUSTMENT
• Twist the barrel adjuster counterclockwise about a quarter to half
turn to tighten the brake.
• Twist the barrel adjuster clockwise about a quarter to half turn to
loosen the brake.
• Please test the brake again before riding.
Quick Note: Leave space between the Folding Hook and the Bell,
otherwise the Bell will not work properly.
Twist Barrel
Adjuster
Hold nut in
place
To Next Page
Loading...
Need help?
General
