Jetson REMIX JETKART User Manual

10
1.1 Attaching the Seat
• FLIP SEAT RIGHT SIDE UP AND MAKE SURE TO PLACE
ON A SOFT SURFACE. ALIGN FRAME TO MATCH BOLT HOLES.
• PLACE WASHER B ONTO BOLT A AND THREAD BOLT
INTO THE HOLE UNTIL FAIRLY TIGHT.
• REPEAT USING REMAINING 3 BOLTS AND 3 WASHERS.
• TIGHTEN WITH PROVIDED WRENCH.
NOTE: BE CAREFUL NOT TO OVER-TIGHTEN THE BOLTS.
DOING SO MAY CAUSE THE SEAT TO CRACK.
1. Get Started

Jetson REMIX JETKART Specifications

General

Brand	Jetson
Model	REMIX JETKART
Category	hoverboards
Language	English