JLab GO User Manual

Troubleshooting Tips
1. Red light flashes slowly: The JLab headset needs to be recharged.
2. If you hear no sound through the earbuds, please check the following:
a. Ensure the headset is charged fully and powered on
b. Ensure the headset is paired successfully with a Bluetooth compatible mobile
device
c. Ensure the distance between the headset and the compatible device is less than 10
meters
d. Ensure no other Bluetooth devices are paired at the same time.
Features and Specifications
Stereo Compatible Sound
Accept and Receive calls directly from the headset
Headset will automatically pause music when a call is incoming
High-fidelity, CD quality sound
Control music selection from the headset
High sensitivity, omni-directional microphone design, voice clarity, no echo;
Specification:
Product Name
JLab GO Bluetooth Headset
Product Type
JLab-BT1
Edition
Bluetooth V2.1+EDR
Frequency coverage
2.402GHZ~2.480GHZ ISM Band
Sensitivity
-80dbm
Wireless Transmitter Standard
CLASS 2
Channel
79channels of 1Mhz BW
Contact Terms
Point-to-Point
Transmit Range
10Meters or less
Frequency Response
20HZ-20KHZ
S/N rate
80db>
Speak power rate
2X10mW
Status Indication
LED indicators
Pairing products
AD2P, ACVRP Bluetooth protocol of the computer,
USB Bluetooth adapter, Bluetooth cell phones
Battery
Lion. 3.7V 150mA
Charge Time
1-2 hours after initial charge of 4 hours
Charge Power
Standard USB 5V
Operating time
More than 5 hours on a single charge

JLab GO Specifications

General

Headset type	Binaural
Product type	Headset
On/off switch	Yes
Product color	Black, Blue
Wearing style	In-ear
Operating keys	Track \u003C, Track >, Volume +, Volume -
Volume control	Rotary
Recommended usage	Calls/Music
Quantity	1
Cables included	Micro-USB
Driver unit	13 mm
Ear coupling	Intraaural
Bluetooth version	2.0+EDR
Connectivity technology	Wireless
Microphone type	Built-in