T25 Two-Stage Room Thermostat Installation Instructions 5
Table 1: Electrical Ratings
Motor Ratings 120 V 208 V 240 V 277 V
AC Full Load Amperes 6.0 3.5 3.0 -
AC Locked Rotor Amperes 36.0 21.0 18.0 -
Non-inductive Amperes 10.0 9.2 8.0 7.2
Pilot Duty—125 VA 24 to 277 VAC
Note: When used as a two-circuit switch, the total connected load must not exceed 2,000 VA.
Technical Data
Product T25 Two-Stage Room Thermostat
Output Single Pole, Double Throw (SPDT)
Switches Two Enclosed Pennswitches
Cover Cold Rolled Steel with “Tawny Silver” Finish
Each Stage 0.7F° (0.4C°) ApproximatelyDifferential (Mechanical)
Between Stages 3F° (1.7C°) Non-Adjustable
Supply Voltage 24 V, 120 V, 208 V, 240 V, 277 V
Mounting With Adaptor Plate for Wall or Electrical Box Mounting; Vertical
Mounting Only
Thermostat 40 to 90°F (5 to 32°C)Range
Thermometer 50 to 90°F (10 to 32°C)
Sensing Element Liquid Charged, No Leveling Required
Individual Pack 1.5 lbs (0.7 kg)Shipping Weight
Overpack of
20 Units
32 lbs (14.5 kg)
Terminals Screw Type. Color Coded:
Red is Common.
Red Closes to Yellow on Temperature Rise.
Red Closes to Blue on Temperature Drop.
Thermometer Bimetal
Agency Listings UL Listed; File E6688, CCN XAPX (U.S.), CCN XAPX7 (Canada)
CSA Certified; File LR948, Class 4813 02
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423 Printed in U.S.A.
Milwaukee, WI 53201 www.johnsoncontrols.com
To Previous Page
Loading...
Need help?
General
