7
Assembly and Usage
Unfolding the Tent
• Remove the safety band. The tent will pop up into full conguration automatically. (1, 2, 3, 4)
ICAUTION: Prevent injury. Be careful when opening
the tent, as it may unexpectedly open in various directions. Hold it
away from your body when opening.
• Unfold the mattress and open the valve. (5) The mattress is self-inating.
• Unzip the pouch under the tent. (6)
• Insert the mattress into the pouch. (7)
• Store the safety band into the pouch under the tent.
IWARNING: No tools are necessary to assemble or
disassemble this product. This product is not a toy. DO NOT
allow children to play with it. Do not use any dierent or additional
mattress, as this may create hazardous gaps or change the height
and dimensions of our product. Do not place the mattress inside
the tent. Use mattress ONLY in the pouch under the tent.
Operating the Tent
• Unzip the cover and roll up. (8, 9) Pull out the elastic loop and insert the plastic pegs into the
elastic loop on each side for holding and easy access. (10)
• Unzip the netting and roll up. (11) Pull out the elastic loop and insert the plastic pegs into the
elastic loop on each side for holding and easy access. (12)
• Place child on top of the sheet. Only place on a at, horizontal, rm and dry surface. Do not use
the tent without the cover sheet.
Cover Sheet
• The cover sheet is removable for washing. To remove, detach the Velcro® at the bottom inside
edge of the tent to gain access to the zipper. (13)
• Unzip the cover sheet from the tent. (14)
• Detach the Velcro® on the cover sheet from the Velcro® on the bottom of the tent.
• To reattach, place the sheet inside the tent.
• Fasten the zipper all the way around the cover sheet. Ensure the zipper is completely fastened.
• Ensure the Velcro® on the cover sheet attaches to the corresponding Velcro® at the bottom of the
tent.
• Completely cover the zipper with the Velcro® at the bottom inside edge of the tent.
To Next Page
Loading...
General