How to Charge the Scooter:
Before charging, turn off the scooter. The scooter is equipped with a powerful charger.
Charging from 0%-100% takes 3 to 4 hours. Always charge the scooter to 100% if
possible. Make sure to charge it to 100% the rst three times. For more information,
see the Charging section above.
• Find the location of the charging port
• Open the charging port rubber plug
• Plug the charger connector from the charger to the scooter and then plug the charger
into the socket.
• After charging, rst unplug the charger from the socket and make sure that the charging
port is covered with the rubber plug.
• Make sure that the e-scooter, the charger, and the charging port of the scooter are
To Next Page
Loading...
Need help?
General
