Power switch
The adjusting hole is provided on the
top of the arm. This hole facilitates
adjustment of the feed-cam timing.
The power switch is built into the control
box to facilitate fabric placement onto
the sewing machine. The ON/OFF
power switch can be checked from a
distance to make sure the machine is
never left ON.
Feed-cam timing
adjusting hole
Since the sewing machine has no
V-belt, the operator needs neither to
clean up shavings from the V-belt, nor
adjust the V-belt tension.
Direct-drive type
The DDL-8700B-7 is a direct-drive, high-speed, lockstitch machine
with an automatic thread trimmer that sews graceful,
high-quality seams on many kinds of fabric.
Ports
Connectors can be inserted into the
ports without removing the cover.
Thread trimming unit
adjusting hole
(Plain knife type)
The operator can adjust the position
of the touch-back switch for easier
operation according to the sewing
product and other sewing conditions.
Thread trimming unit adjusting hole is
provided. Adjustment of the hook
timing (temporary fixing) can be carried
out without tilting the sewing machine.
Touch back switch
A thinner LED light is provided near
the needle entry area. Its illuminance
can be adjusted in five step.
LED light is provided
as standard.
Front
Back
DDL-8700B-7
To Next Page
Loading...
Need help?
General
