JUKI MO-50eN User Manual

ON
OFF
51
Maintenance
A
B
Note:
Always use 110V/230V/240V/
15W bulbs. Bulbs are available
from your local dealer.
If voltage indicated on the electrical
rating plate of your machine is
220-240V, ask for light bulb conforming
to following specification.
-Edison type (screw type):
220 ~240V, 15W
Glass shape: T-22
Lamp cap: E14
Overall length: 56mm
- Switch the machine off "O" and
disconnect it from electricity supply
by removing the mains plug.
- Loosen the bulb cover setscrew (A)
and remove the bulb cover.
- Unscrew the bulb and replace it with
a new one.
- Attach bulb cover and re-tighten the
setscrew.
Changing light bulb
If voltage indicated on the electrical
rating plate of your machine is 100V,
ask for light bulb conforming to
following specification.
If voltage indicated on the electrical
rating plate of your machine is
110-120V, ask for light bulb conforming
to following specification.
-Edison type (screw type):
100V, 12W
-Edison type (screw type):
110 ~120V, 15W
Glass shape: T-20
Glass shape: T-20
Lamp cap: E12
Lamp cap: E12
Overall length: 48mm
Overall length: 48mm
- Disconnect machine from electricity
supply.
During sewing dust and fluff collect in
and on the machine. This should be
removed regularly.
Your overlocker requires very little
lubrication but if used frequently,
lubricate the points illustrated (B) with
a drop of oil.
Cleaning and lubricating

JUKI MO-50eN Specifications

General

Brand	JUKI
Model	MO-50eN
Category	Sewing Machine
Language	English