Replace bulb with same type rated 15Watts.
Use foot controller
7. - Details of the machine
9. - Accessories
9. - Accessory Box
9. - Looper cover
9. - Waste collector
11. - Attaching the foot control
11. - Sewing speed
11. - Assembling the thread stand
11. - Thread cones
11. - Power/ light switch
13. - Handwheel
13. - Presser foot lifter
13. - Changing the presser foot
15. - Inserting needles
15. - To lower the upper knife
17. - Threading/ Preparation
17. - Upper looper ( )Blue
19. - Lower looper (Red)
21. - Right needle (Green)
23. - Left needle (Yellow)
23. - After threading
25. - Sewing test
25. - Check your trial run
27. - Adjusting the thread tension
29. - Stitch length
29. - Cutting width
31. - Gathering*
- 3 thread overlock
- 3 thread rolled hem
- Unpicking seams
- Changing light bulb
- Cleaging and lubricating
31. - Differential feed*
13. Using the machine
17. Threading
Contents
25. Trial sewing, thread tension
27. Adjusting the thread tension
29. Adjustments and settings
31. Differential feed*
33. Practical sewing
35. Maintenance
37. Trouble shooting guide
41. Technical data
1. Safety regulations
5. Contents
7. Details of the machine
9. Preparing the machine
4C-315A221
4C-316B22
4C-326C22
4C-316C24
4C-316C26
4C-316C28
4C-326G22
4C-326C25
4C-326C23
Foot controller (100v) Japan
Foot controller (115v) U.S.A.
Foot controller (220v) South Africa
Foot controller (220v) Argentina
Foot controller (220v) Korea
Foot controller (220v) the Middle East
Foot controller (230v) Europe
Foot controller (240v) U.K.
Foot controller (240v) Australia
To Next Page
Loading...
Need help?
General
