Juniper J-Series User Manual

J-series Services Router Quick Start
4 ! Installing a Services Router
If you are installing a J4350 or J6350 Services Router, take the following steps:
1. Attach the air filter and filter cover, as shown in Figure 1.
Figure 1: Attaching Air Filter and Filter Cover
2. Attach the mounting brackets to either the center or front of the chassis, as
shown in Figure 2.
Figure 2: Attaching Mounting Brackets
Installing a Services Router
Installing a J2300 Services Router
To install a J2300 Services Router on a desk, attach the rubber feet to the underside
of the chassis.
g003819
POWER
P
O
W
E
R
S
T
A
T
U
S
A
L
A
R
M
H
A
RESET
CONFIG
PORT 0
STATUS
Air filter
Filter cover
Cover latches
g003860
WARNING: A DC-powered J2300 Services Router is intended for installation in a
dedicated equipment room where it is accessible by trained personnel only. Other
DC-powered Services Routers are intended for installation in a restricted access
location.

Juniper J-Series Specifications

General

Brand	Juniper
Model	J-Series
Category	Network Router
Language	English