52
Onscreen Menus
This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,
should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to
"ON".
Press the M
ENU button
π†
To VIDEO-1 MONITOR OUT
è
To select ON or OFF
Press the MENU button to finish
Video-1 Monitor Out
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
VIDEO-1 MONITOR OUT
DIGITAL-IN
DIGITAL-IN1 AUDIO
OFF
SIZE1
DIGITAL
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
ENU button
π†
To DIGITAL-IN
è
To enter
π†
To select AUTO, SIZE1 or SIZE2
Press the MENU button to finish
Digital-In
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
VIDEO-1 MONITOR OUT
DIGITAL-IN
DIGITAL-IN1 AUDIO
OFF
SIZE1
DIGITAL
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.
LCT2128-001B-A English.indd 52LCT2128-001B-A English.indd 52 7/6/06 9:37:28 AM7/6/06 9:37:28 AM
To Next Page
Loading...
Need help?
General
