6
DAILY USE
SWITCHING ON AND OFF TV SET
SWITCHING ON
If stand-by indicator (B6) is not lit, then the TV set is
powered off.
Switch the set ON with POWER (ON/OFF) Button
(B1), then, stand-by indicator turns to red.
Press again PROGRAM UP or DOWN buttons (B10) on
the front of the set, or POWER button (A2) or UP/DOWN
button (A11) or, one of the NUMBER 0...9 button on the
remote control, then stand-by indicator turn to green and
picture appears on the screen.
If stand-by indicator (B6) is flashing red and green, TV
set is in CHILD LOCK mode. To deblock CHILD LOCK,
press the remote control POWER button (A2) or one of
NUMBER 0...9 buttons (A3) or PROGRAM UP (A11) /
DOWN (A12) buttons.
Note : The front panel PROGRAM UP or DOWN (B10)
button will not function when CHILD LOCK is ON.
1
2
3
4
5
6
7
8
9
0
P
P
PROGRAM SELECTION (FROM 0 TO 99)
DIRECT SELECTION
Use the remote control NUMBER 0..9 buttons (A3).
For two digit program numbers, enter the second
digit within 2 seconds.
UP/DOWN SELECTION
Use the remote control PROGRAM UP (A11) /
DOWN (A12) buttons or the TV set front panel
PROGRAM UP / DOWN buttons (B9).
SWITCHING OFF
Press POWER button (A2) on the remote control to return the
set to its STAND BY mode. If you don't use the set for an
extended period of time, turn it off with MAIN POWER button
(B1) on the set.
ENGLISH
From AV mode, you can select TV
program directly by pressing remote
control 0.....9 buttons (A3).
or
To Next Page
Loading...
Need help?
General
