EasyManuals Logo
Home>JVC>Home Theater System>AX-THL1

JVC AX-THL1 User Manual

JVC AX-THL1
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8
Connections
To obtain the best possible sound from this system, you need to place all the speakers except the subwoofer at the same
distance from the listening position.
If your speakers cannot be placed at the same distance from the listening position
You can adjust the delay time of the speakers. See “Delay menu (DELAY)” on page 30.
NOTE
Place the satellite speakers on a flat and level surface.
The subwoofer, front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed
properly, they may cause color distortions. So, pay attention to the following when installing the speakers.
When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then
wait at least 30 minutes before turning on the TV’s main power switch again.
Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.
The surround speakers are not magnetically shielded.
If they are located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the
speakers nearby the TV or monitor.
Speaker layout
Front right
speaker
Center speaker
Subwoofer
Surround left
speaker
Surround right
speaker
Front left
speaker
Do not connect the power cord until all other connections have been made.
TH-L1[JC].book Page 8 Friday, March 16, 2007 10:22 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC AX-THL1 and is the answer not in the manual?

JVC AX-THL1 Specifications

General IconGeneral
BrandJVC
ModelAX-THL1
CategoryHome Theater System
LanguageEnglish

Related product manuals