29
English
To cancel Random Play, press 7 STOP (or 7 on the CD Player control section on the remote control)
twice. When the RANDOM indicator goes out, Continuous Play mode is resumed.
Repeating a Track or the Discs
You can have all the discs, the program or the individual track currently playing repeat as many times as
you like.
Press REPEAT.
Each time you press the button, the Repeat Modes change as follows.
= REPEAT ALL = REPEAT 1 = No indicator = (back to the beginning)
REPEAT ALL: Repeats all the tracks on the CDs, or all the tracks in the program.
REPEAT 1: Repeats one track on one CD.
To exit Repeat Mode, press REPEAT until the Repeat Mode indicator on the display goes out.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single
operation.
When the Tray Lock function is on, the trays cannot be opened even if the 0 button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Trays —————————————————————
1. Put the System’s power into STANDBY mode.
2. While pressing 7 STOP, press 0 for DISC 1 on the Unit.
“LOCKED” appears on the display to let you know that the trays have been locked.
When the CD Player trays are locked, pressing 0 displays the message “LOCKED” on the display
and the trays do not open. Also, 0 cannot be used to automatically turn on the power.
Unlocking the Trays ————————————————————
1. Put the System’s power into STANDBY mode.
2. While pressing 7 STOP, press 0 for DISC 1 on the Unit.
When the unlock operation is done, “UNLOCKED” appears on the display to show that the lock has
been taken off.
The trays can now be opened by pressing 0.
The 0 can also be used to automatically turn on the power.
REPEAT
or
REPEAT
EN21-31.CA-V908T[U]/f 98.7.22, 8:05 PM29
To Next Page
Loading...
Need help?
General
