61
Maintenance
ENGLISH
Install the new lamp unit
Tighten the screws of the new lamp
unit
Attach the lamp cover
CAUTION
●
Use only genuine replacement
parts for the lamp unit. Also,
never attempt to reuse an old
lamp unit. This may cause a
malfunction.
●
Do not touch the surface of a
new lamp. This may shorten
the lamp life and cause lamp
blowout.
MEMO
After Replacing the Lamp
●
Do not place the removed
lamp unit at locations that is
reachable by children or near
combustible items
.
●
Dispose used lamp units in
the same way as uorescent
lamps
.
Follow your local
community rules for disposal.
5
6
●
Tighten the screws with a screwdriver.
●
Insert the top part (with 2 claws) of the lamp cover into
the unit.
●
Fasten the screws with a screwdriver.
7
Handle
To Next Page
Loading...
Need help?
General
