1
D-ILA Home Theater Projector
“Projector Calibration Software 5”
INSTRUCTIONS
About the marks being used in this manual
refers to as explanations/instructions for DLA-X95R and DLA-X75R.
refers to as explanations/instructions for DLA-X900R and DLA-X700R.
refers to as explanations/instructions for DLA-X500R.
Items without markings are for all models.
“Projector Calibration Software” is a tool that enables you to use the projector in an optimal condition at all times with
the use of a commercially available optical sensor.
Calibration Feature
By performing a precise calibration with easy procedures in optimizing the projected images, which changes
depending on the installation conditions, such as installation position of the main unit, lens shift/zooming position,
you can enjoy high-quality images that are suitable for the installation conditions. You can also maintain the projector
in an optional state by correcting distortions, such as those in the color balance, which are caused by the prolonged
use of the projector.
Environment Settings
Adjusts the video settings according to the installation environment to minimize any influence on the image quality
by objects, such as white walls or indirect illumination.
Import/Export Image Quality Adjustment Data
Enables you to save the image setting data to a PC from the projector, or imported from a PC to the projector via the
LAN terminal.
* “Projector Calibration Software” is designed to adjust gamma and color display by changing the settings of the
projector.
* Please note that setting of the projector is changed by using this software.
● Projectors that support calibration
Models supported: DLA-X900R, DLA-X700R, DLA-X500R, DLA-X95R, DLA-X75R
● PC (computer)
● LAN cable
● Optical sensor
Models supported: Spyder4
ELITE/PRO by Datacolor
*Spyder4
ELITE and Spyder4PRO are registered trademarks of Datacolor in the United States and other countries.
About “Projector Calibration Software”
Required Equipment
X95R/X75R
X900R/X700R
X500R
JVC_PCS_manual.fm 1 ページ 2014年7月29日 火曜日 午後6時50分