JVC DR-MV100B User Manual

Dubbing from VCR to DVD
DVD
VHS
2
Insert Blank Disc
and Cassette
Find the place
on the VHS tape
from which you
want to start
dubbing.
1
7
Access the
Dubbing
menu screen.
3
Stop Dubbing.
Preparation : Set the resolution to 480i using the OUTPUT STATUS button before dubbing.
Press VCR button to set the VCR mode.
6
Start Dubbing.
4
Select the desired
Record Mode.
You can copy the contents of a VHS tape to a DVD using the DUBBING
button. This allows you to archive your old VHS tapes to DVD.
INSTRUCTIONS
pg. 37
5
Select [Dubbing].
Note:
To playback the recorded disc with other DVD players, it is necessary to finalize the disc.
(INSTRUCTIONS pg. 21)
Select XP, SP, LP or EP
- 6 -

JVC DR-MV100B Specifications

General

Progressive scan output	Yes
Analog signal format system	PAL
Audio formats supported	MP3, WMA
Image formats supported	JPG
Device type	DVD recorder
Product color	Black
On Screen Display (OSD) languages	ENG, ESP, FRE, POR
Disc types supported	CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RAM, DVD-RW
Composite video out	1
Programming period	30 day(s)
Dimensions (WxDxH)	430 x 260 x 71.5 mm
Power requirements	AC 120V/60Hz
Power consumption (standby)	1 W
Power consumption (typical)	23 W

Weight and Dimensions

Weight	4400 g