JVC EM65FTR Quick Start Guide

Rev. 12/13 Emerald FTR Series QUICK START GUIDE
TROUBLESHOOTING
Problem Solution
No Power
 Make sure the power cord is plugged in.
 The power is off; press Power button to turn on the TV.
 Try another outlet.
 Unplug the unit for an hour, and then plug it back in.
Poor or No Sound
 Press the VOL Up button on the remote control or adjust volume using the Power/Multi-Function
button on TV (see page 6 for details).
 Press MUTE button on the remote control to ensure mute is not on.
 The channel or cable TV broadcast is experiencing problems. Tune to another channel.
 Check the TV audio settings and possible sources of interference.
Poor or No Picture
 The channel or cable TV is experiencing problems. Tune to another channel.
 Make sure that channels are set into memory.
 Check the antenna or cable TV connections.
 Check for possible sources of interference.
Poor Reception on
Some Channels
 The channel or cable TV broadcast is experiencing problems. Tune to another channel.
 Make sure that channels are set into memory.
 The network signal is weak. Adjust the antenna to receive a better reception
 Check for possible sources of interference.
The Remote Control
does not work
 Batteries may be weak, dead, or inserted incorrectly.
 Point the remote control directly at the IR sensor on the TV with an angle of 35 degrees.
 Remove any obstacles between the remote control and the TV.
 Remote control is out of range. Move closer to the TV.
TV Shuts Off
 Sleep timer is set.
 Power is interrupted.
No CATV Reception
 Check all cable TV connections.
 Set the TV Mode in Channel menu.
Closed Caption is not
activated
 The channel/program is not a closed caption broadcast. Try another channel.
 Enable Closed Caption in the Menu.

JVC EM65FTR Specifications

General

Brand	JVC
Model	EM65FTR
Category	LED TV
Language	English