54
A Band
B Preset number
C Sound mode
D Service label/Emsemble label
*
1
E PTY code
F DAB indicators
*
2
/Standby Reception indicators
*
1
If no signal is received, “No DAB Signal” appears.
*
2
While tuning in a service with DLS (Dynamic Label
Segment), the TEXT indicator lights up.
~ Touch [SRC], then select “DAB.”
Ÿ Touch [BAND].
! Touch [ ] or [ ] to search for an
ensemble—Auto Search.
• Manual Search: Hold either [ ] or [ ] until
“Manual Search” appears on the screen, then
touch it repeatedly.
⁄ Touch [FUNC] to select [ ], then touch
[
5] or [∞] to select a service (either
primary or secondary) to listen to.
[FUNC]: Changes items to select with [5 / ∞].
– : Services
– : Preset services ( 27)
• You can also display DLS by pressing DISP button
on the remote controller.
• To improve your listening when surrounding
sounds are noisy, try to adjust <D. Range
Control>. ( 25)
• To activate/deactivate TA/PTY Standby
Reception, 35. (Operations are exactly the
same as the ones for FM Radio Data System
stations.)
• To search for your favorite programmes, 34.
Listening to the DAB tuner
Touch to display DLS.
EN_KDAVX7755[A]f.indb 54EN_KDAVX7755[A]f.indb 54 09.4.3 4:47:49 PM09.4.3 4:47:49 PM
To Next Page
Loading...
Need help?
General
