48
ENGLISH
External component operations
Playing an external component
EXT-IN: For selecting the external
component connected to the
CD changer jack.
• If you have changed the “Ext Input”
setting to “Changer” (see page 44),
you cannot select “EXT-IN.”
Ÿ Turn on the connected component
and start playing the source.
! Adjust the volume.
⁄ Adjust the sound as you want.
(See pages 25 – 35.)
You can connect an external component to the
LINE IN plugs on the rear.
You can also connect an external component to
the CD changer jack on the rear using the Line
Input Adapter KS-U57 (optionally purchased)
or Aux Input Adapter KS-U58 (optionally
purchased).
Before operating the external component, select
the external input correctly (see page 44).
• For connection, see Installation/Connection
Manual (separate volume).
~
LINE-IN: For selecting the external
component connected to the
LINE IN plugs.
SOURCE
SOURCE
EN41-48_KD-SHX851[EX_EU]f.indd 48EN41-48_KD-SHX851[EX_EU]f.indd 48 05.4.8 8:51:13 PM05.4.8 8:51:13 PM
To Next Page
Loading...
Need help?
General
