JVC FS-Y1A User Manual

10
Connecting up Connection
English
This page is for when connecting the main unit with
other devices.
Connecting subwoofer
Connecting with other audio device
When you want to hear sound from the subwoofer,
press S.WFR OUT on the remote control to display
“SUBWOOFER” on the display window on the
main unit. Each time you press the button, the
display toggles between “SUBWOOFER” and
“OFF”.
NOTE
When “SUBWOOFER” is selected, bass sound from
the left and right speakers will be automatically
lowered and the bass sound will be emitted mainly
from the subwoofer.
Connecting with a digital device
CAUTION
• For details of signals to be output, refer to page
30.
• If connecting the main unit with equipment with the
function of a Dolby Digital decoder, the setting in
“D. RANGE COMPRESSION” of “AUDIO” (page 30)
will be invalid regarding sound from the digital
audio output of the main unit.
Connecting other devices
SUB-
WOOFER
OUT
With an amplifier-built in subwoofer (not supplied), you can enjoy a more dynamic bass sound.
Refer to the manual of the subwoofer for details.
Audio cord (not supplied)
(If an audio cord comes with the amplifier-built-in subwoofer,
you can use the cord.)
Amplifier-built-in subwoofer
(not supplied)
Main unit
R
L
AUX
Main unit
Output
Input
Other audio
device
Audio cord (not
supplied)
WhiteRed
PCM/
STREAM
DVD OPTICAL
DIGITAL OUT
Output
Optical digital cord
(not supplied)
Digital device
(MD recorder etc.)
To digital input terminal
Input
Main unit
(continued) – Do not turn on the power until the connection is complete –
FS-Y1[UGUX]main.book Page 10 Friday, March 25, 2005 10:01 PM

JVC FS-Y1A Specifications

General

Brand	JVC
Model	FS-Y1A
Category	Speaker System
Language	English