JVC FS-Y1A User Manual

34
English
Connect the other audio device to this system in
advance (page 10).
1 Press AUX.
The source changes to AUX.
2 Play the other audio device.
For details, refer to the manual of the device
connected.
3 Adjust the volume and the
sound quality of the system
(page 16).
Without setting the built-in clock, you cannot use
any timers.
• To exit from the clock setting, press CLOCK/
TIMER as required.
• To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
1 Press CLOCK/TIMER.
• If you have already adjusted the clock
before, press the button repeatedly until the
clock time starts flashing.
2 Press cursor 2/3 to adjust the
hour, then press SET.
3 Press cursor 2/3 to adjust the
minute, then press SET.
Now the built-in clock starts to work.
Using the daily timer, you can wake up with your
favorite song.
• You can store the three daily timer settings;
however, you can activate only one of the daily
timer.
• To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
Setting the built-in clock
Setting the daily timer
SVCDVD-A
Setting the Various Timer
Listening to the sound of
other audio device
FS-Y1[UGUX]main.book Page 34 Friday, March 25, 2005 10:01 PM

JVC FS-Y1A Specifications

General

Brand	JVC
Model	FS-Y1A
Category	Speaker System
Language	English