37
Audio Dubbing
You can record a new soundtrack on a prerecorded tape
(normal audio only).
** Perform steps 1, 2 and 3 of the Insert Editing procedure
(Z pg. 36) before continuing.
FIND EDIT-IN POINT
1
Press REW to go a little beyond the beginning of the
scene onto which you want to dub new audio, press
PLAY to view the recorded tape, then press PAUSE
at exactly the point where dubbing should start.
ENGAGE AUDIO DUB STANDBY
MODE
2
Press and hold A. DUB, and press PAUSE.
BEGIN AUDIO DUBBING
3
Press PLAY. When the counter reaches “0:00:00”,
Audio Dubbing stops automatically and the
camcorder enters the playback mode.
NOTES:
●
Audio Dubbing may not work correctly if the tape
contains blank segments, or if the recording speed was
changed during the original recording.
●
If the camcorder’s mike is too close to the TV, or if the
TV’s volume is too high, whistling or howling may
occur.
Audio dubbing indicator
Viewfinder
Mic
REW
PAUSE
A. DUB
PLAY
RM-V700U
(optional)
To Next Page
Loading...
Need help?
General
