JVC GR-AX358EG User Manual

EN 31
Animation
Give stationary scenes or objects an illusion of
movement. This function allows you to shoot a
series of pictures, each slightly different, of the same
object for a brief period of time.
NOTE:
Make sure the camcorder is in the Record-Standby
mode and the recording mode is set to “SP” before
performing the following steps.
ACCESS MENU SCREEN
1
Turn the Select Dial to any position except
AUTO LOCK, then press MENU Jog Dial.
SET RECORDING TIME
2
Rotate the MENU Jog Dial to move the
highlight bar to “REC TIME”, then press the
MENU Jog Dial. The REC TIME Menu appears.
Rotate the MENU Jog Dial to move the
highlight bar to the desired time, then press the
MENU Jog Dial. The Menu Screen reappears.
Press the MENU Jog Dial again to exit the
Menu Screen.
START RECORDING
3
Press the Recording Start/Stop Button after
focusing on the subject. The recording stops
automatically after the selected period of time.
ASSEMBLE SERIES OF
PICTURES
4
Repeat step 3 for the desired number of
pictures.
RELEASE ANIMATION MODE
5
Set “REC TIME” in the Menu screen to “OFF”.
NOTES:
● For best results, make sure the camcorder is
secured when shooting in Animation or
Time-Lapse mode.
● Fade-in/out cannot be performed during
Animation or Time-Lapse shooting.
● Before performing other operations following
Animation or Time-Lapse recording, make sure
the Animation or Time-Lapse mode is deactivated.
● Self-Timer, Animation and Time-Lapse are
cancelled when the power is shut off or when the
cassette is ejected.
Time-Lapse
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time.
NOTE:
Make sure the camcorder is in the Record-Standby
mode and the recording mode is set to “SP” before
performing the following steps.
ACCESS MENU SCREEN
1
Turn the Select Dial to any position except
AUTO LOCK, then press MENU Jog Dial.
SET INTERVAL BETWEEN
RECORDINGS
2
Rotate the MENU Jog Dial to move the
highlight bar to “INT. TIME”, then press the
MENU Jog Dial. The INT. TIME Menu appears.
Rotate the MENU Jog Dial to move the
highlight bar to the desired time, then press the
MENU Jog Dial. The Menu Screen reappears.
SET RECORDING TIME
3
Rotate the MENU Jog Dial to move the
highlight bar to “REC TIME”, then press the
MENU Jog Dial. The REC TIME Menu appears.
Rotate the MENU Jog Dial to move the
highlight bar to the desired time, then press the
MENU Jog Dial. The Menu Screen reappears.
Press the MENU Jog Dial again to exit the
Menu Screen.
START TIME-LAPSE
RECORDING
4
Press the Recording Start/Stop Button.
Recording and intervals alternate
automatically.
RELEASE TIME-LAPSE MODE
5
To release when “
PAUSE
” is displayed, set
“REC TIME” and “INT. TIME” in the Menu
Screen to “OFF”. To release when
“
PAUSE
” and “
REC
” are not displayed,
press the Recording Start/Stop Button to display
“
PAUSE
”, then set “REC TIME” and “INT.
TIME” in the Menu Screen to “OFF”.

JVC GR-AX358EG Specifications