56 EN
D.S.C. PLAYBACK
Advanced Features
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
ACCESS MENU SCREEN
1
Press the MENU Jog Dial. The Menu Screen
appears.
SELECT FUNCTION
2
Rotate the MENU Jog Dial to place the highlight bar
on the desired function.
•If the setting you want can’t be found in the Menu
Screen, place the highlight bar on “MENU END”,
then go to step 5.
MAKE SETTING
3
Press the MENU Jog Dial. The setting menu of the
selected function appears. The setting procedure
depends on the function you select.
If you select “INDEX” . . .
.... Z pg. 58.
•Select the desired still image in the INDEX
Menu Screen, then press the MENU Jog Dial.
The selected still image appears on the whole
screen, then the screen enters normal
playback. It is not necessary to perform steps 4
and 5.
If you select “SLIDE SHOW 1”, “SLIDE SHOW 2”,
“PROTECT” or “DELETE”. . .
.... see respective pages.
END SETTING
4
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is on “MENU END”.
CLOSE MENU
5
Press the MENU Jog Dial. The normal screen
reappears.
NOTE:
If you rotate the MENU Jog Dial while watching in the
LCD monitor with it flipped over and retracted, rotate it
in the direction which is opposite to the one descried in
this manual.
MENU
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
4
MENU END
MENU
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
4
MENU END
01
04
03
06
02
05
<
PROTECT
>
EXIT
Normal Screen
LCD monitor or viewfinder
Menu Screen
Setting Menu
(ex. PROTECT)
MENU Jog DialSelect Dial
To Next Page
Loading...
Need help?
General
