EasyManuals Logo
Home>JVC>Camcorder>GR-D770AG

JVC GR-D770AG User Manual

JVC GR-D770AG
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
EDITING
44 EN
MasterPage: Left
[A] Using USB cable
It is possible to transfer still images stored on a
memory card to a PC.
[B] Using DV cable
It is also possible to transfer still/moving
images to a PC with a DV connector by using
the provided software, software equipped with
the PC or commercially available software.
If you are using a Windows
®
XP, you can use
Windows
®
Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
Windows
®
Messenger.
NOTES:
Refer to SOFTWARE INSTALLATION AND
USB CONNECTION GUIDE for the bundled
software and drivers.
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
pg. 13)
Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to
the camcorder.
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.
If the PC connected to the camcorder via the
USB cable is not powered, the camcorder does
not enter the USB mode.
The date/time information cannot be captured
into the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a PC
with a DV connector-equipped capture board.
The system may not work properly depending
on the PC or capture board you are using.
If, after connecting a DV cable to the camcorder
and it doesnt work, restart the camcorder.
Do not remove memory card during USB
connection between PC and set.
Connection To A Personal
Computer
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
Connect the DV cable rst to the PC, and
then to the camcorder.
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
To USB
PC
PC with DV connector
USB cable
(provided)
To DV IN/OUT
[B] Using DV cable
To USB
connector
To DV
connector
Core lter
Core lter
DV cable
(optional)
OR
Core lter
or
USB and/or appears on the
LCD monitor while the PC is accessing data
in the camcorder or the camcorder is
transferring a le to the PC.
NEVER disconnect the USB cable while
is displayed on the LCD
monitor since this can result in product
damage.
GR-D770AG_EN.book Page 44 Tuesday, December 5, 2006 1:47 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC GR-D770AG and is the answer not in the manual?

JVC GR-D770AG Specifications

General IconGeneral
BrandJVC
ModelGR-D770AG
CategoryCamcorder
LanguageEnglish

Related product manuals