EN 27
D.S.C. Recording & Playback
ENGLISH
To Print By Selecting Still Images
And Number Of Prints
11
Perform steps
1
–
44
in “To Print All Still
Images (One Print For Each)” ( 26).
22
Select “CURRENT”, press SET. The DPOF
screen appears.
3
Press £ or ¤ to select the desired fi le.
44
Press ¢ or ¡ to select the number
indication (00), and press SET.
55
Select the number of prints by pressing ¡
to increase the number, or ¢ to decrease
the number, and press SET.
• Repeat steps
33
through
55
for the desired
number of prints.
• The number of prints can be set up to 15.
• To correct the number of prints, select the
image again and change the number.
66
Select “RETURN”, press SET. The “SAVE?”
appears.
• If you did not change any settings in step
33
through
55
, the DPOF Menu reappears.
77
Select “EXECUTE”, press SET.
• To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
11
Perform steps
1
–
44
in “To Print All Still
Images (One Print For Each)” ( 26).
22
Select “RESET”, press SET. The DPOF
screen appears.
33
Select “EXECUTE”, press SET.
• To cancel selection, select “RETURN”.
• The number of prints is reset to 0 for all still
images.
Caution:
While performing the above, never disconnect
power, as this may cause the memory card to
be corrupted.
Note:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with
“DIS” deactivated ( 29) this can be avoided.
Initializing A Memory Card
You can initialize a memory card any time.
After initializing, all fi les and data stored in
the memory card, including those which have
been protected, are cleared.
11
Perform steps
1
–
33
in “Normal Playback
Of Images” ( 24).
2
Press MENU.
3
Select “MEMORY CARD” ( ).
44
Select “FORMAT”, press SET. The
FORMAT menu appears.
55
Select “EXECUTE”, press SET. The
memory card is initialized.
• When initialization is fi nished, “NO
IMAGES STORED” appears.
• To cancel initialization, select “CANCEL”.
13
4
5
6
GR-D850&870US_EN.indb 27GR-D850&870US_EN.indb 27 11/12/2007 2:48:08 PM11/12/2007 2:48:08 PM
To Next Page
Loading...
Need help?
General
