JVC GY-HM250U User Manual

Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to “On”).
0
An encoding bit
rate exceeding 8.0 Mbps cannot
be selected when [Type] is set to “RTSP/RTP”.
0
An encoding bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to other than “Low”, or when
[Type] is set to “RTMP”.
0
An encoding bit rate exceeding 3.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to “Low”.
0
Depending on the type of network adapter used
and the connection, the images and audio
sound during live streaming can be choppy.
Log In
Displays the Facebook login wizard screen.
Log Out
Logs out from Facebook.
Log In
Displays the YouTube login wizard screen.
Log Out
Logs out from YouTube.
Connection Setup
For configuring the network connection settings.
A [Wizard] screen will appear according to the
adapter connected to the [HOST] terminal. Follow
the instructions to perform the setting.
You can Load, Store, and Delete the settings
specified on the [Wizard] screen.
9
Wizard
A [Wizard] appears according to the adapter
connected to the [HOST] terminal.
Follow the instructions.
9
Load
Loads the settings on the [Wizard
] screen.
(A P182 [Reading the Connection Settings
File] )
9
Store
Saves the settings on the [Wizard] screen.
(A P181 [Saving the Connection Settings File] )
9
Delete
Deletes the saved settings.
(A P182 [Deleting Connection Settings] )
9
APN
For specifying APN (Access Point Name).
* This item is grayed out and cannot be selected
if APN cannot be set for the adapter attached.
Caution :
0
The APN setting is written into the cellular
adapter, not this camera recorder.
Setting a wrong APN may result in
communication failure or expensive bills from
the telecommunications company.
Set the APN
correctly.
(A P160 [Connecting via Cellular Adapter] )
System Menu
131
Menu Display and Detailed Settings

JVC GY-HM250U Specifications

General

Brand	JVC
Model	GY-HM250U
Category	Camcorder
Language	English