JVC GY-HM250U User Manual

1
Select [TC/UB] B [TC Preset
]
and press the
Set button (R).
(A P111
[ TC Preset ] )
The [TC Preset
] screen appears.
.
1
TC Preset
00:00:00:00
TC/UB
Memo :
0
When [TC/UB] B [TC Generator] is set to
“Regen”, the parameter
is displayed as “Regen”
and cannot be selected.
(A P111 [ TC Generator ] )
2
Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
.
During drop frame
During non-drop
frame
Cursor
TC Preset
00:00:00:00
TC/UB
Memo :
0
Press the [C.REVIEW/4] button to reset each
digit to
“0”. The cursor moves to the time digit
(left).
3
Check the values and press the Set button
(R).
0
The time code is set and the screen returns
to [TC/UB].
0
To cancel the setting, press the [CANCEL/
STOP] button.
4
Press the [MENU/THUMB] button.
Returns to the normal screen.
Setting Time Code without Opening the
Menu
.
Memo :
0
Settings cannot be
made in the following cases.
0
[TC/UB] B [TC Generator] has been set to
“Regen”.
0
Menu screen is displayed.
0
The camera recorder is not in the Camera
mode.
Setting Time Code
1
Set [TC/UB] B [TC Generator] to
“Rec Run”
or “Free Run”.
(A P111 [ TC Generator ] )
2
Press the [TC/2
] button.
The [TC Preset] setting screen appears.
.
TC Preset
During drop frame
During non-drop frame
Cursor
3
Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
Memo :
0
Press the [C.REVIEW/4] button to reset each
digit to
“0”. The cursor moves to the time digit
(left).
74
Setting Time Code Generator
Shooting

JVC GY-HM250U Specifications

General

Brand	JVC
Model	GY-HM250U
Category	Camcorder
Language	English