7
ENGLISH
Attaching the Shoulder Strap
Peel off the pad and thread
the end of the strap through
the eyelet.
Thread the strap through the
buckle, adjust its length, and
use the strap guide to fi x it
in place.
Position the buckle near the
eyelet and reattach the pad.
Attaching the Core Filter
Attach the core fi lter to the AC adapter’s DC cord. The core fi lter reduces interference.
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Eyelet
Strap Guide
Buckle
Release the stopper.
3 cm
Wind once.
Effective distance:
5 m
Remote Sensor
Lock Tab
Lithium Battery
(CR2025)
To Next Page
Loading...
Need help?
General
