32
EN
OPERATIONS ON S-VHS DECK (cont.)
Express Timer
Programming
If you do not know the S
HOW
V
IEW
number for the programme
you wish to record, use the following procedure to set your unit
to timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the S-VHS deck.
On the unit
Press
S-VHS/DVD
repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press
S-VHS
so that the S-VHS indicator lights up.
B
Access the S
HOW
V
IEW
screen.
Press
PROG
.
C
Access the Programme screen.
The front display panel looks like this:
D
Enter the programme start time.
The front display panel looks like this:
E
Enter the programme stop time.
Press
STOP +/–
to enter the time you want recording to
stop.
● Press and hold
STOP +/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press
DATE +/–
.
● The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the
TV/S-VHS/DVD
switch to the right.
Press
START +/–
. (If you’re
just starting out, “P1”
appears.)
Press
START +/–
to enter the
time you want recording to
start.
● Press and hold
START +/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
To Next Page
Loading...
Need help?
General
