JVC JA-S310 User Manual

Voltage Changeover
1. Remove the six screws from the Bottom Board. (see Fig.
10)
LINE VOLT appr ape
200 — 240V QMF60R1-1R2} OMF51A2-1R25 | OMFGOR1-1R2
Fig. 10
2. Remove the Bottom Board from the chassis.
3. The voltage select plug is located at the conner of the
chassis. Remove this select plug and change the position
of it so that the arrow points to the required voltage.
(see Fig. 11)
4. Replace the safety fuse as well as with one of
appropriate capacity.
AC LINE VOLTAGE
100 — 120V
200 — 240V
Fig. 11
JA-S310
No. 2355 _~g_

JVC JA-S310 Specifications

General

Brand	JVC
Model	JA-S310
Category	Amplifier
Language	English