22 ENGLISH
Using the remote controller
5
U
/
D
∞
: Changes the preset
stations
2
R
/
F
3
: Searches for stations
• This setting cannot take effect for the
conventional FM/AM stations.
• If the radio station forces the reception
mode to digital or analog, the
or
indicator lights up.
Listening to the satellite radio
Before operating, connect either one of the following systems (not supplied) to the expansion port
on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SC-C1 and KS-SRA100
• PnP, SC-VDOC1 and KS-SRA100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UC and CNPJVC1
• For details, refer also to the instructions supplied with the other components.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. The following appears
and no sound can be heard:
– For SIRIUS Satellite radio: “Updating”
– For XM Satellite radio: “UPDATING”
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
~
]
“SIRIUS” or “XM”
!
]
Select a channel to listen.
Holding the button changes the channels
rapidly.
While searching, invalid and unsubscribed
channels are skipped.
XM: If you do not select a channel
within 15 seconds, category selected in
step
Ÿ
is canceled. You can select all
channels of all categories now (including
non-categorised channels).
Ÿ
]
Select a category.
SIRIUS: If you select “ALL,” you can
tune in to all the channels of all
categories.
EN22-29_KD-A815[J]f.indd 22EN22-29_KD-A815[J]f.indd 22 12/17/09 2:35:30 PM12/17/09 2:35:30 PM
To Next Page
Loading...
Need help?
General
