22 OPERATIONS
ENGLISH
USB operations
You can connect a USB mass storage class device such as a USB memory, portable HDD, etc. to the unit.
• You can also connect an Apple iPod/iPhone to the USB input terminal. For details of the operations, see pages
31 – 34.
This unit can play MPEG Video/MP3/WMA/WAV tracks stored in a USB mass storage class device (such as
a USB memory, Digital Audio Player, portable HDD, etc.).
1
Turn on the power.
2
Connect a USB device.
All tracks will be played repeatedly until you change the
source or disconnect a device.
USB memory
If a USB device has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the USB input terminal.
• “NO USB” appears. Press SRC to listen to another
playback source.
Turn on the monitor to watch the playback picture
if you play back an MPEG file. You can also control
playback by referring to the monitor screen. (See also
pages 18 – 21.)
• See pages 16 – 21 for operation using the remote
controller.
• See pages 45 and 46 for more settings.
If “ ” appears on the monitor when pressing a
button, the unit cannot accept the operation you
have tried to do.
• In some cases, without showing “ ,” operations
will not be accepted.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 13 – 21.)
EN18-27_KD-ADV6580[J]f.indd 22EN18-27_KD-ADV6580[J]f.indd 22 2/24/09 11:59:33 AM2/24/09 11:59:33 AM
To Next Page
Loading...
Need help?
General
