JVC KD-AHD69 User Manual

[Turn] .... [Press]
• Repeat this procedure.
While listening to an HD Radio station ...
• i~~~diT menu is called up.
..
f$ Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
[Hold]
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1 Call up the SET menu.
[Hold]
When a station is tuned in, searching stops.
• Searching for HD Radio stations
only
4 Select /lMONO ON./I
Lights up when holding the digital reception.
Flashes when holding the analog reception.
Select ''TUNER'' -+ "BLEND HOLD"
-+ "AUTO/DIGITALI ANALOG"
• If no sound can be heard with" AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "A UTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
[Turn] .... [Press]
[Turn] .... [Press]
[Turn] .... [Press]
To restore the stereo effect, repeat the same
procedure to select "MONO OFF."
Reception improves, but stereo effect will be lost.
3 Select /lMONO./I
2 Select/lTUNER./I
10
[Turn] .... [Press]
• Repeat this procedure.
While listening to an HD Radio station ...
• i~~~diT menu is called up.
..
f$ Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
[Hold]
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1 Call up the SET menu.
[Hold]
When a station is tuned in, searching stops.
• Searching for HD Radio stations
only
4 Select /lMONO ON./I
Lights up when holding the digital reception.
Flashes when holding the analog reception.
Select ''TUNER'' -+ "BLEND HOLD"
-+ "AUTO/DIGITALI ANALOG"
• If no sound can be heard with" AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "A UTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
[Turn] .... [Press]
[Turn] .... [Press]
[Turn] .... [Press]
To restore the stereo effect, repeat the same
procedure to select "MONO OFF."
Reception improves, but stereo effect will be lost.
3 Select /lMONO./I
2 Select/lTUNER./I
10

JVC KD-AHD69 Specifications

General

Brand	JVC
Model	KD-AHD69
Category	Car Stereo System
Language	English