7
ENGLISH
When an FM stereo broadcast is hard to
receive
Lights up when monaural mode is activated.
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you
want to store into.
2
3
“SSM” flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Radio operations
~
Ÿ
Lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Selected band appears.
! Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select the desired station frequencies.
EN06-11KD-G525[U_UH]f.indd 7EN06-11KD-G525[U_UH]f.indd 7 8/31/05 1:06:13 PM8/31/05 1:06:13 PM
To Next Page
Loading...
Need help?
General
