22
ENGLISH
○○○○○○○○○
Making sound natural
This unit is equipped with two features to make
sound natural—CC Converter and BBE Digital.
To activate Compression Compensative
(CC) Converter
CC Converter eliminates jitter and ripples,
achieving a drastic reduction in digital
distortion. This processing can be applied to the
analog sources as well as the digital sources;
therefore, you can obtain a natural sound field
from any source.
1
While playing any source...
The Main Menu appears on
the display.
2
Move the cursor to “CCC” on the Main
Menu.
3
Enter the CCC Menu.
4
Select “On.”
• When “CCC” is turned on, the CCC
indicator is brightened in yellow on the
display.
• To cancel CC Converter, select “Off.”
To exit from the Menu operation, press
MENU again.
To activate BBE Digital
BBE
Digital is a new digital processing method
to restore the brilliance and clarity of the
original live sound in recording, broadcasts, etc.
When a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach
the ear than low frequency sounds. BBE Digital
adjusts the phase relationship between the low,
mid and high frequencies by adding a
progressively longer delay time to the low and
mid frequencies, so that all frequencies reach
the listener’s ears at the proper time.
1
While playing any source...
The Main Menu appears on
the display.
2
Move the cursor to “BBE” on the Main
Menu.
3
Enter the BBE Menu.
4
Select the effect level.
• As the number gets higher, the effect
level becomes stronger. When “BBE” is
turned on, the BBE indicator is
brightened in green (with its current
level) on the display.
• To cancel BBE Digital, select “Off.”
To exit from the Menu operation, press
MENU again.
Off 1
23
MENU
MENU
Cursor
Cursor
OK
BAND
OK
BAND
On
Off
20-23_KD-AR_SHX700[J]f.p65 3/30/04, 2:29 PM22
To Next Page
Loading...
Need help?
General
