EasyManuals Logo
Home>JVC>Car Receiver>KD-DB42

JVC KD-DB42 User Manual

JVC KD-DB42
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
MP3/WMA/AAC playback
Symptom Remedy/Cause
Disc cannot be played back.
0
Record the tracks using a compliant application on the
appropriate discs. (A page 20)
0
Add appropriate file extensions to the file names.
“READING” keeps flashing on the
display.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
Tracks do not play back in the
order you have intended them to
play.
The playback order is determined when the files are recorded.
The elapsed playing time is not
correct.
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
USB device playback
Symptom Remedy/Cause
“READING” keeps flashing on the
display.
0
A longer readout time is required. Do not use too many
hierarchical levels or folders.
0
Turn off the power then on again.
0
Reattach the USB device again.
“NOT SUPPORT” appears on the
display and track skips.
Check whether the track is a playable file format.
Tracks/folders are not played back
in the order you have intended.
The playback order is determined by the file name. Folders with
names beginning with numbers are sorted in numerical order.
Folders with names not beginning with numbers are sorted
according to the file system of the USB device.
0
“CANNOT PLAY” flashes or “NO
USB” appears on the display.
0
The unit cannot detect the USB
device.
0
Check whether the connected USB device is compatible with
this unit.
0
Reattach the USB device again.
While playing a track, sound is
sometimes interrupted.
The tracks have not been properly copied into the USB device.
Copy tracks again into the USB device, and try again.
iPod/iPhone playback (KD-DB52 only)
Symptom Remedy/Cause
The iPod does not turn on or does
not work.
0
Check the connecting cable and its connection.
0
Charge the battery of the iPod/iPhone.
0
Reset the iPod/iPhone.
0
Check whether <IPOD SWITCH> setting is appropriate.
(A page 12)
The sound is distorted. Deactivate the equalizer either on this unit or the iPod/iPhone.
Noise is generated. Turn off (uncheck) the “VoiceOver” feature of the iPod.
For details, visit <http://www.apple.com>.
Playback stops. The headphones are disconnected during playback.
Restart the playback operation. (A page 11)
“CANNOT PLAY” flashes on the
display.
Check whether the connected iPod/iPhone is compatible with
this unit. (A page 11)
Troubleshooting
ENGLISH |
23

Other manuals for JVC KD-DB42

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-DB42 and is the answer not in the manual?

JVC KD-DB42 Specifications

General IconGeneral
MP3 playbackYes
Audio formats supportedAAC, MP3, WMA
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Preset stations quantity24
Output power200 W
Ready for iPod-
Frequency range5 - 20000 Hz
Audio output channels4.0 channels
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)98 dB
Cables includedUSB

Related product manuals