EasyManuals Logo
Home>JVC>Car Receiver>KD-DB902BT

JVC KD-DB902BT Quick Start Guide

JVC KD-DB902BT
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
(B) “[Device Name]” “VOL–YES” “BACK–NO”
Press the volume knob to start pairing.
If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code
“0000” into the Bluetooth device.
If only “PAIRING” appears, operate the Bluetooth device to confirm
pairing.
“PAIRING COMPLETED” appears when pairing is completed and “
” will light
up when the Bluetooth connection is established.
Answer a call
Press or the volume knob.
To adjust the phone volume
[00]
to
[35]
, turn the volume knob.
To end a call, press and hold or the volume knob.
Audio player via Bluetooth
1 Press B SRC repeatedly to select BTAUDIO.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Select group or folder
Press 2 J / 1 K.
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play
Press 4 repeatedly.
Random play
Press 3 repeatedly.
BLUETOOTH®
Depending on the operating system and the firmware version of your
mobile phone, Bluetooth features may not work with this unit.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Secure using cord
clamps (not supplied)
if necessary.
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KD-DB9 BT”) on the
Bluetooth device.
3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps
described below.
(A) “[Device Name]”
“XXXXXX” “VOL–YES” “BACK–NO”
“XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device
are the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
JS_JVC_QSG_KD_DB902BT_E_EN_1.indd 10JS_JVC_QSG_KD_DB902BT_E_EN_1.indd 10 7/5/2018 10:12:38 AM7/5/2018 10:12:38 AM

Other manuals for JVC KD-DB902BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-DB902BT and is the answer not in the manual?

JVC KD-DB902BT Specifications

General IconGeneral
BrandJVC
ModelKD-DB902BT
CategoryCar Receiver
LanguageEnglish

Related product manuals