12
ENGLISH
Disc operations
Before performing any operations...
Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control
playback of other discs by referring to the monitor screen. (See pages 15 – 17.)
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start
depends on its internal program).
If the current disc does not have any disc menu (when playback stops), all tracks will be played
repeatedly until you change the source or eject the disc.
If “
” appears on the monitor when pressing a button, the unit cannot accept the operation you
have tried to do.
• In some cases, without showing “
,” operations will not be accepted.
Insert disc.
Playback starts automatically with most of the discs.
Eject disc.
Change the display information
Start playback if necessary.
Prohibiting disc ejection
To cancel the prohibition, repeat
the same procedure.
*
1
If the file does not have Tag information or “TAG
DISP” is set to “TAG OFF” (see page 24), folder
name and file name appear. TAG indicator will
not light up.
*
2
“NO NAME” appears for an audio CD.
EN12-17_KD-DV4202[E]f.indd 12EN12-17_KD-DV4202[E]f.indd 12 12/10/05 1:04:38 PM12/10/05 1:04:38 PM
To Next Page
Loading...
Need help?
General
