ENGLISH
30
Symptom Remedy/Cause
MP3/WMA playback
• Disc cannot be played back. • Change the disc.
• Record tracks using a compliant application in the
appropriate discs (see page 4).
• Add the extension code <.mp3> or <.wma> to the file
names.
• Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3/WMA
tracks.)
• Longer readout time is required. Readout time varies due to the complexity of the folder/file
configuration. Do not use too many hierarchies and folders.
• Tracks cannot playback as you have intended
them to play.
Playback order is determined when files are recorded.
• Elapsed playing time is not correct. This sometimes occurs during playback. This is caused by
how the tracks are recorded.
• “NO FILES” appears on the display. Insert a disc that contains tracks of appropriate formats.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers, and
a limited number of symbols.
CD changer
• “NO DISC” appears on the display. Insert a disc into the magazine.
• “NO MAG” appears on the display. Insert the magazine.
• “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
EN26-33_KD-DV4206_001A_3.indd 30EN26-33_KD-DV4206_001A_3.indd 30 12/10/05 2:16:42 PM12/10/05 2:16:42 PM
To Next Page
Loading...
Need help?
General
