ENGLISH
31
Symptom Remedy/Cause
iPod/D. player playback
• The iPod or D. player does not turn on or does
not work.
• Check the connecting cable and its connection.
•
Change the battery.
• Update the firmware version.
• Buttons do not work as intended. The functions of the buttons have been changed. Press
MODE before performing the operation.
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod/
D. player.
• “NO IPOD” or “NO DP” appears on the display.
Check the connecting cable and its connection.
• Playback stops. The headphones are disconnected during playback. Restart
the playback operation (see page 17).
• No sound can be heard when connecting an
iPod nano.
Disconnect the headphones from the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the display when
connecting a D. player.
Disconnect the adapter from the D. player. Then, connect
it again.
• “NO FILES” or “NO TRACK” appears on the
display.
No tracks are stored. Import tracks to the iPod or D. player.
• “RESET 1” – “RESET 7” appears on the display. Disconnect the adapter from both this unit and iPod/
D. player. Then, connect it again.
• “RESET 8” appears on the display. Check the connection between the adapter and this unit.
• The iPod’s or D. player’s controls do not work
after disconnecting from this unit.
Reset the iPod or D. player.
EN26-33_KD-DV4206_001A_f.indd 31EN26-33_KD-DV4206_001A_f.indd 31 12/20/05 3:57:19 PM12/20/05 3:57:19 PM
To Next Page
Loading...
Need help?
General
