EasyManuals Logo
Home>JVC>Car Receiver>KD-DV4306

JVC KD-DV4306 User Manual

JVC KD-DV4306
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
ENGLISH
36
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power
Output:
Front/Rear: 50 W per channel
Continuous Power
Output (RMS):
Front/Rear: 19 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8% total
harmonic distortion
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range: Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
Signal to Noise Ratio: 70 dB
Audio Output Level: Digital (DIGITAL OUT: Optical): Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
Line-Out Level/Impedance: 2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Color system: PAL/NTSC
Video Output (composite): 1 Vp-p/75 Ω
Other Terminal: KD-DV5306/KD-DV5305: CD changer, LINE IN, AUX (auxiliary) input jack
KD-DV4306/KD-DV4305: CD changer
Symptom Remedy/Cause
iPod/D. player
“NO FILES” or “NO TRACK” appears on the
display.
No tracks are stored. Import tracks to the iPod or D. player.
“RESET 1” – “RESET 7” appears on the display. Disconnect the adapter from both this unit and iPod/
D. player. Then, connect it again.
“RESET 8” appears on the display. Check the connection between the adapter and this unit.
The iPod’s or D. player’s controls do not work
after disconnecting from this unit.
Reset the iPod or D. player.
EN34-37_DV5306_001A_f.indd 36EN34-37_DV5306_001A_f.indd 36 12/21/06 3:51:38 PM12/21/06 3:51:38 PM

Other manuals for JVC KD-DV4306

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-DV4306 and is the answer not in the manual?

JVC KD-DV4306 Specifications

General IconGeneral
BrandJVC
ModelKD-DV4306
CategoryCar Receiver
LanguageEnglish

Related product manuals