9OPERATIONS
Preparation
Canceling the display demonstration and setting the clock
• See also page 25.
1
Turn on the power.
2
Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK” = “CLOCK SET.”
Adjust the hour, then press control dial once to proceed to
adjust the minute.
• To return to the previous menu, press BACK.
[Turn] = [Press]
Press and hold until the
main menu is called up.
• Repeat this procedure.
Listening to the radio
1
Select “FM” or “AM.”
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same
button again.
• You can also search for a station manually—Manual Search. Hold either one of
the buttons until “M” flashes on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST
indicator lights up on the display.
Changing the display information
Frequency = Clock = Station name * = (back to the beginning)
* If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 27.
Continued on the next page
EN02-09_DV4506_001A_f.indd 9EN02-09_DV4506_001A_f.indd 9 11/12/08 12:51:33 PM11/12/08 12:51:33 PM
To Next Page
Loading...
Need help?
General
