12
Disc operations
Before performing any operations...
Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other
discs by referring to the monitor screen. (See pages 17 – 20.)
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its
internal program).
If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or
eject the disc.
If “
” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to
do.
• In some cases, without showing “ ,” operations will not be accepted.
1
Turn on the power.
2
Insert a disc.
All tracks will be played repeatedly until you change the source
or eject the disc.
Selecting a track/folder (MP3/WMA/WAV/CD)
• For MP3/WMA/WAV discs, select the desired folder,
then the desired track by repeating the control dial
procedures.
• To return to the previous menu, press BACK.
[Hold]
Stop playing and ejecting the disc
“NO DISC” appears. Press /SOURCE to listen to
another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
[Turn]
= [Press]
EN10-21_KD-DV5606_001A_1.indd 12EN10-21_KD-DV5606_001A_1.indd 12 12/12/09 4:23:05 PM12/12/09 4:23:05 PM
To Next Page
Loading...
Need help?
General
