EasyManuals Logo
Home>JVC>Car Receiver>KD-DV7405

JVC KD-DV7405 User Manual

JVC KD-DV7405
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
39SETTINGS
55Hz: Frequencies higher than 55 Hz
are cut off.
85Hz: Frequencies higher than 85 Hz
are cut off.
120Hz: Frequencies higher than 120 Hz
are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4 Press number button 1 ( ) to
move to another setting level.
4 /¢ : select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If “Off” is selected in step
2, you can only
adjust the subwoofer phase.
C Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
Off: All signals are sent to the front/rear
speakers.
62Hz: Frequencies lower than 62 Hz are
cut off.
95Hz: Frequencies lower than 95 Hz are
cut off.
135Hz: Frequencies lower than 135 Hz are
cut off.
D VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
Before making an adjustment, select the
source you want to adjust.
E Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4 Exit from the setting.
Storing your own sound modes
You can adjust the sound modes and store your own
adjustments in memory.
When is shown on the display, you can
move back to the previous screen by pressing number
button 6.
1
2 Select a sound mode.
3 Select a frequency range to adjust.
4 Adjust the sound elements of the selected
frequency range.
1 Press 4 /¢ to select the
frequency band, then press 5 / to
enhanced level for the selected frequency
band. [–6 to +6]
2 Press number button 5 ( ), then turn
the control dial to select the frequency.
3 Press number button 5 ( ), then turn
the control dial to select the quality slope (Q).
5 Repeat steps 3 and 4 to adjust the other
frequency bands.
6 Store the adjustments.
EN32-39_KD-DV7406_005A_f.indd 39EN32-39_KD-DV7406_005A_f.indd 39 2/12/08 2:03:51 PM2/12/08 2:03:51 PM

Table of Contents

Other manuals for JVC KD-DV7405

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-DV7405 and is the answer not in the manual?

JVC KD-DV7405 Specifications

General IconGeneral
BrandJVC
ModelKD-DV7405
CategoryCar Receiver
LanguageEnglish

Related product manuals