EasyManuals Logo
Home>JVC>Car Receiver>KD-G351

JVC KD-G351 User Manual

JVC KD-G351
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
ENGLISH
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 15).
To activate TA Standby Reception
The TP (Traffic Programme) indicator
either lights up or flashes.
If the TP indicator lights up, TA Standby Reception is
activated.
If the TP indicator flashes, TA Standby Reception is
not yet activated. (This occurs when you are listening
to an FM station without the RDS signals required for
TA Standby Reception.)
To activate TA Standby Reception, tune in to another
station providing these signals. The TP indicator will
stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite PTY programme from any
source other than AM.
To activate and select your favorite PTY code for
PTY Standby Reception, see page 15.
The PTY indicator either lights up or flashes.
If the PTY indicator lights up, PTY Standby Reception
is activated.
If the PTY indicator flashes, PTY Standby Reception is
not yet activated.
To activate PTY Standby Reception, tune in to another
station providing these signals. The PTY indicator will
stop flashing and remain lit.
! Start searching for your favorite
programme.
If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.
Storing your favorite programme
types
You can store six favorite programme types.
Preset programme types in the number buttons
(1 to 6):
1 Select a PTY code (see pages 7 and 8).
2 Select the preset number (1 – 6) you want to
store into.
3 Repeat steps 1 and 2 to store other PTY codes
into other preset numbers.
4 Finish the procedure.
Ex.: When “ROCK M” is selected
EN08-17_KD-G441_003A_4.indd 8EN08-17_KD-G441_003A_4.indd 8 10/24/07 10:04:07 AM10/24/07 10:04:07 AM

Other manuals for JVC KD-G351

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-G351 and is the answer not in the manual?

JVC KD-G351 Specifications

General IconGeneral
MP3 playbackYes
DVD Audio playbackNo
FM band range87.5 - 108 MHz
LW band range144 - 279 kHz
Output power50 W
Product colorBlack
Frequency range40 - 20000 Hz
Audio output channels4.0 channels
Equalizer bands quantity3
Signal-to-Noise Ratio (SNR)98 dB
File typeMP3/WMA
Filtering descriptionIF Filter
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)182 x 52 x 159.5 mm

Related product manuals