13
ENGLISH
CD OPERATIONS
Refer to “MP3 OPERATIONS” on pages 18 to 21
for operating MP3 discs.
Playing a CD
1
Open the control panel.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD CD-CH turns on the unit and starts playback
automatically.
2
Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
playback automatically.
3
Close the control panel by hand.
All tracks will be played repeatedly until you
stop playback.
Total playing time
of the inserted disc
Total track number
of the inserted disc
Elapsed playing
time
Current track
number
Notes:
• When a CD is inserted upside down, the CD
automatically ejects (if the control panel is open).
If the control panel is closed, the source changes to
the previously selected source, “PLEASE” and
“EJECT” appear alternately on the display.
• If there is no CD in the loading slot, you cannot
select CD as the source. “NO DISC” appears on
the display.
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
The display changes to show the following:
Current source indication
CD indicator
EN13-16_KD-AR400_G400[J]f.p65 9/26/03, 4:19 PM13
To Next Page
Loading...
Need help?
General
